TV wont work unless i wiggle the plug. Its loose and i need to know how to change it out myself.Can you help?

Leti, July 2006

Check the obvious first as the wires may just be loose or breaking as it enters the plug (especially if tugged when hoovering etc) and also check the fuse is snug also within the holder if you have fuses in mains plugs in your country.

sparky, August 2006

its ferly strait forward but there is one thing that u have to do before you take off the wire leave the tv off for about 24 hours theres a very big discharge if u dont ull be bounced around the room or even killed, take off the back of the tv useing a screwdriver then follow the wire to the circuit board unclip the wire and replace with new one sometimes the wire will be soldered on,just keep wiggling them for to break them off then use a soldering gun to reconnect the new wire ok hope that helps.

john j, August 2006

its ferly strait forward but there is one thing that u have to do before you take off the wire leave the tv off for about 24 hours theres a very big discharge if u dont ull be bounced around the room or even killed, take of the back of the tv useing star a screwdriver then follow the wire to the circuit board unclip the wire and replace with new one sometimes the wire will be soldered on,just keep wiggling them for to break them off then use a soldering gun to reconect the new wire ok hope that helps.

john j, August 2006