Was wondering how do you find all the model and bar codes etc. for the radio to be able to find out the code to unlock it? As had a new battery fitted today!! Do I have to remove the CD player to find them... I'm hoping not!!!

its a 1999+ model renault scenic megane?

Thanks =D

jessm, December 2010

your welcome glad i could help

hay88, December 2010

Hay88, IT WORKED!!!! THANK YOU SOOOOOOOOOOOO MUCH!!! your a star!!! I have music back in my life... haha thanks again!!!!!

=D

jessm, December 2010

ohhhh hay88 thank you sooooo so so so much will go give them a go now... have also just posted on another site you've help people on too lol will be back in touch!!! =D

jessm, December 2010

hi your code
if o425 = 1538 you must hold at the end to store the code.
if q425 = 9532
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY

Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code

FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and hold buttons 6 to store. for 10 seconds

hay88, December 2010

hay88,
I'v tried emailing the addy you put but had a bounce back ??

So heres the codes....

T00425

7700434425TO*425

* I couldn't read it properly so couldn't tell what it was its either 0, O or Q!? Sorry...

hope you can help (or anyone)!!!

thanks

jessm, December 2010

ohhhhh thank you.... may have to d it tomoz now as its dark.... but will =D thanks.... =D

jessm, December 2010

jess
you need to remove the radio.
they are too small holes each side of the radio
use an old metal coat hanger 4 darts or very small screwdriver or long nails.
put into holes about 4-5cms and push outwards sideways
and carefully pull radio forward.
you must do the holes on each side at the same time

Then post the numbers/letters from below the main barcode
something like 7700xxxxxxtt123 or 8200xxxxtt123 or
the security code like Q123 or T0U123
can be found in a small box then i can help you
off of the radio
then mail me at codehelp(at)hotmail.co.uk

hay88, December 2010