Iveco engine in my Santana ps10 ststion wagon start first time every time and will drive perfect most of the time then the rev will just cut to idle speed with nothing on the accel pedal for 2-5 seconds then it's back to normal as if nothing happen. With the cold weather at present it just don't want to move ,and will start as normal but will not go above 15 hundred revs with the engine sound like very weak mixrure and the EDC test flashing. Take your foot off the accel pedal and in a few seconds EDC light goes off and idle speed back to normal and will only rev up to 1500-2000 revs then cut back to idle with EDC flafhing and weak mixture sound. HELP . Thanks (Roy)
hi y0u need to cleen the fuel reulator valv it is in the back of the hi presser pamp
omar shahin, September 2011
Mine is exactly the same and has been for past two winters - if it falls belows -6, the diesel 'freezes'. Mine not running since Dec5/10 due to this, once it thawed, the slave cylinder [clutch] packed in and with the unavailability of clutch slave cylinders in the country its still not running!!!
barneybo, February 2011
Hello Roy,
Did you get to the bottom of the problem? Just wondered as mine is doing the very same thing. I was not sure if it was the fuel waxing in this cold wether or if there is a problem elsewhere?
Thank you
Gavin.
