we have a potterton neta heat profile boiler,which never fires itself, we have to push the button under the boiler and it comes on for about an hour, we have to keep repeating this function.
weve had a new fan, a new pressure switch, a new p.c.b board and a new door seal. and it still hasnt rectified it.
please help..

mr harvey, January 2011

Potterton 50E neataheat profile...

Hot is water now working on demand? ok

Central heating still not working on demand...

could it be the overun thermostat on the boiler ?
or
Gravity DHW/pump overrun thermostat on the boiler?

HELPPPPPPPPPPPPP

Anthony, January 2011

should make it clear i still have both faults No CH & HW.
____________________________________________

Potterton netaheat -profile-boiler

1st fault was no CH - ?

Now 2nd fault... just develpoed the hotwater will now not start ? (would fire up ok without any problem yesterday) Pump was running when hotwater was selected.

Parts changed over the 3 years..

1).New PCB electonic control ( Located at the bottom of the boiler) - 2yrs

2).New Gas control valve - 3yrs

3). New motorized valve & thermostat - Water cylinder tank -2 yrs

help help help

______________________________________________

Anthony
January 2011

Now the hot water will not select ?

I get the red lights on the controller but nothing is now firing up?

______________________________________________

Anthony
January 2011

You can hear the pump running when the hotwater is selected so i think the pump is OK.

I have bleed all the radiators in the system.

______________________________________________

Anthony
January 2011

Can you help please ..

I have a Potterton heaaheat profile boiler, my problem is with Central Heating ..no heat to the rads. I do get hot water when selected. but no CH when selected?

The pump is running when hot water is selected from the Honeywell controller but will not run when CH is selected only?

Also the wall thermostat does not trigger the CH to come on when turned up to max?

______________________________________________

HHHHHHHHHHHHHHHHHH....Help

Anthony, January 2011

Potterton netaheat -profile-boiler

1st fault was no CH - ?

Now 2nd fault... just develpoed the hotwater will now not start ? (would fire up ok without any problem yesterday) Pump was running when hotwater was selected.

Parts changed over the 3 years..

1).New PCB electonic control ( Located at the bottom of the boiler) - 2yrs

2).New Gas control valve - 3yrs

3). New motorized valve & thermostat - Water cylinder tank -2 yrs

help help help

Anthony, January 2011

Now the hot water will not select ?

I get the red lights on the controller but nothing is now firing up?

Anthony, January 2011

You can hear the pump running when the hotwater is selected so i think the pump is OK.

I have bleed all the radiators in the system.

Anthony, January 2011

Can you help please ..

I have a Potterton heaaheat profile boiler, my problem is with Central Heating ..no heat to the rads. I do get hot water when selected. but no CH when selected?

The pump is running when hot water is selected from the Honeywell controller but will not run when CH is selected only?

Also the wall thermostat does not trigger the CH to come on when turned up to max?

Anthony, January 2011

Try looking towards the pump.
Either the pump is shot or there isn't a pump overrun fitted.
It could of course, be the boiler stats themselves, but check the pump first.

Carefree, January 2011