Had work done on my peuguot 106 and garage took out engine to get to the job and my radio cassette hasnt worked since, ive tried different codes but now its says on the screen 7 error...How do i get the correct code and imput it into the radio with this message on the screen. Starting work soon and need a radio to commute... thanks

Dawn Williams, January 2011

code 4122

hay88, January 2011

sorry for the inconvenience but hotmail is down at the moment so it wont let me send the details through email.. the number i have is TOV828...hope u can help, the radio is reset now just waiting for the 4 digit code. thanks

Dawn Williams, January 2011

hi the code i have is tov828, thanks alot....

Dawn Williams, January 2011

yes just send me the number that look some thing like TOU123 to codehelp(at)hotmail.co.uk

hay88, January 2011

thank you i will try this in the morning to reset the radio. would you know the 4 number code i would need to enter once it is reset. sorry for inconvenience..

Dawn Williams, January 2011

Please note that code entry is only possible when "CODE" is shown in the display. If the display continually shows four lower bars " _ _ _ _ " then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.
so leave turned on untouched until it resets itself

hay88, January 2011

Dawn Williams
post the number something like TOU123 off of the radio

you need to remove the radio.
they are too small holes each side of the radio
use an old metal coat hanger 4 darts or very small screwdriver or long nails.
put into holes about 4-5cms and push outwards sideways
and carefully pull radio forward.
you must do the holes on each side at the same time

hay88, January 2011