home Fix label Household Appliances label_important Washing Machines category Bosch

What is Error F43 on a bosch logixx 8 washing machine?

Stuart Broadbent, January 2011

home Fix label Household Appliances label_important Washing Machines category Boschdone

Love you guys thanks so much saved me a fortune am due to have baby in five weeks so didnt need added expense of a new washing machine . Gotta love the internet xxxxx

sonya, October 2017

Thank you Jon. These instructions helped me. Washing machine had stuck with a load of washing inside.

Fi, March 2017

I followed Jon Page's instructions from November 2011 and it worked.

Thank you very much, saved me a fortune.

Audrey, Edinburgh, December 2015

In australia my logic washing machine to clear error code is Put dial to spin, hold left options key, turn dial to drain, release left options key. Your machine should reset it self. My F43 error also turned out to be the bushes worn.

Simon, September 2015

Brushes on mine were worn to less than 1/2 inch.
Replaced and cleaned the black soot from the worn brushes.
Runs great now.
Thanks

Golf nut, January 2015

Jon Page thank you...you saved me today😄

Orla, January 2015

there is no spin button to press and hold

Marcus Rose, September 2014

motor brushes /hall sensor /associated wiring /control module
after any repair to the above do a reset as outlined perfectly in the post above

moonraker2, September 2014

The F43 error code by the Bosch washing machine answer from Jon Page is perfect. I followed it and got immediate results in less than 5 secs. cheers Jon.

Craig, August 2014

motor defect

jduith, May 2014

Motor or Circuit Board Fault. Try resetting circuit board first - knob to off (12 oclock), then down (6 oclock), press and hold spin, round to 9 oclock, wait 5 secs, release spin, knob to 12 oclock. should be reset.
If it doesnt work investigate wiring\board\motor.

Jon Page, November 2011

motor error...change 2 motor brushes # 605694

michele, July 2011

siemens error f 43

kian, February 2011

Controll the Heater.

honk4711, January 2011

link Click here to see other fixes for Bosch Logixx 8.