katlego asked ... Rev count on my 1982?    |    andrew asked ... "SECURE" on a yellow backround, and I cant ge?    |    Melodie asked ... How do I remove and change the basket? Duratech Identity Gu?    |    Kathy asked ... Samsung ER-4915?    |    Mark asked ... Oven door removal?    |    Click here to ask your question

How can i stop the lever stiffness?

The basin tap in the bathroom is a loop single lever mono mixer tap which is 6 years old.The tap is not leaking but the lever has become rather stiff and creaky when operating.Is it possible to repair it without dismantling it, if so how does it come apart.The model reference which I have is,PH305 PH361
John Board, January 2011
Thank you marcus the glamd nut was unbelievably tight I took it off sprayed some wd40 on the blue flange,put the nut back,a bit looser but I still get some noise,but it is a lot better'thankyou.

john board, January 2011
In the front you will find a plastic plug carefully remove it behind the plastic plug you will find a grub screw remove it and lift of the tap top it might be a little stiff so go gently with it after doing that you will see a gland nut undo this place a bit of wd 40 just a squirt.. Put the top back on and try moving it around and it should go away.. It should be ok good luck

marcus, January 2011