andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

1990 case 580k won,t start?

my backhoe stopped running not out of fuel i have change the fuel pump & shut off & can,t get any fuel out of lines but fuel i can get fuel out of the two small screw on the side of injection pump.
MIKE FOREE, February 2011
not sure about yours but my 89 was a simple 10 amp fuse for the fuel shutoff solenoid

dbowerman, April 2012
If you are happy that you have bled all the air out of the low presssure system and the fuel coming out of the bleed screws on the injection pump is completely free of air. The next step to check that the high pressure side of the pump is working ie the pump is rotating. Remove one of the injection pipes from the distribtion head of the pump and crank the engine for a least a minute continously and see if fuel is being injected out of the connection, they do take a fair bit of cranking to then get the fuel through the injectors.

The pumps do not like water contaimnation of the fuel and fail internally.

Ash, February 2011
the injection pump is bad

smoe, February 2011
link Click here to see other fixes for Case 580K.