I have replaced the PCB, transformer, and the motor and still get nothing. This is one of 2 that had a similar problem. Last one was fixed by replacing the transformer. I'm stumped. This one has been practically rebuilt. Any Ideas???

jamie, March 2011

have you checked the interlock switches? in addition some ultimate 65s have a fuse in the interlock switch circuit.

you might try jumping them all out as a test

if your around pittsburgh I will take a look for free.

I assume you know there have been 5 or 6 revisions to the 65s main board, depending on the revision status of your unit some require a rewire kit.

Its sad ultimate 65 main boards are so expensive, in fact all the parts cost a fortune:(

bob haller service and sales pittsburgh pa, March 2011