How do I replace door seal on hotpoint aquarius washer wm 520P - I have the seal - just need to know how as machine this is a later model and I can't find any instructions on the net?

John, April 2011

this is for most hotpoint machines,some of the newer ones have electronic panel,so there wont be any knobs to pull off,and the bezel will have a screw on each side you need to remove

mm, April 2011

uplug the machine,remove the top,remove the dispenser drawer,remove the screws behind the drawer,remove the control knob,there are two screws behind it that need removed,remove the bezel,(control panel)remove the door seal from front of machine,(held on with a wire and spring)remove three screws from the front panel at top,remove three screws at bottom of front panel,carefully place front panel aside taking care you dont damage the door look or wiring,remove the doorseal from drum,fit new one,and reverse the procedure

mm, April 2011