Melodie asked ... How do I remove and change the basket? Duratech Identity Gu?    |    Kathy asked ... Samsung ER-4915?    |    Mark asked ... Oven door removal?    |    Jt asked ... Where to buy mt270x petrol cap?    |    Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Click here to ask your question

How can I fix my smart drive 9 pride washing machine?

The machine starts & stops intermittently then stops completely with the second two (green) lights in the wash cycle area on and one orange light next to the spin cycle on. The machine is also beeping about once a second.
Andy, May 2011
Fault code 52. This means that the machine is losing water during the cycle and the water level has dropped. Check drain hose is not too low. It must come up level with top of lid before going down to any drain. If it empties in to a waste pipe, check that hose is not too far down pipe which may cause a suction effect which will syphon the water out.

Lincoln Appliance NZ, May 2011
From the left side the 3rd, 4th & 6th lights are on.

Andy, May 2011
To read the code I need to know exactly which lights are on. Makes a big difference if from left or from right side. From left side exactly which lights are on & which are off along top row?

Lincoln Appliance NZ, May 2011