Stopped and red light on,flashing error all lights on ,when tryed to investigate i found the error was for serviceing required for worn out parts,Rubbish,i dont beleive it does,does anyone know how to reset it?? please help anyone??

trev, September 2006

Buy a an Epson RX425 repair disc off the internet for £2.99 and install it. Problem solved.

ronrob1938, January 2013

YES, I fixed My epson printer myself!! I love the internet with helpful forums out there. Thank you videojetman!

search no more, July 2010

i have the same problem, in my opinion, bin it and get a new printer, i just got a canon all in one pixmamp250 for £35.00. from argos. it would have cost nearly that much to have it serviced.

videojetman., May 2010

In most cases, it's a waste ink pad full problem (the sponge that sucks wasted ink is full). But it probably isn't full yet (Epson claims it's full long before it really is!).

You'll have to download the service program for Epson printers (which gives you access to service functions of your printer):
http://www.eserviceinfo.com/downloadsm/22895/SEIKO%20EPSON_EPSON%20RX420-425-430.html

Run the exe file (it doesn't work in Windows Vista or 7 - you'll need old xp for that). Then Select Sequential Adjustment Mode. Select your printer model and then Waste ink pad replacement. Press Ok.

You might have to try a bit.
After you suceed, you need to turn off the printer and turn it on again. If all went well, you won't be seeing all the blinking lights on your printer ;)

www.cool-proxy.net, May 2010

In most cases, it's a waste ink pad full problem (the sponge that sucks wasted ink is full). But it probably isn't full yet (Epson claims it's full long before it really is!).

You'll have to download the service program for Epson printers (which gives you access to service functions of your printer):
http://www.eserviceinfo.com/downloadsm/22895/SEIKO%20EPSON_EPSON%20RX420-425-430.html

Run the exe file (it doesn't work in Windows Vista or 7 - you'll need old xp for that). Then Select Sequential Adjustment Mode. Select your printer model and then Waste ink pad replacement. Press Ok.

You might have to try a bit.
After you suceed, you need to turn off the printer and turn it on again. If all went well, you won't be seeing all the blinking lights on your printer ;)

www.cool-proxy.net, May 2010

Your rx430 works for XP but not for Vista.
Any fixes anyone??

Hudo, January 2010

please help my printers lights all flashing and e green light on

goldie, March 2009

Hi all got some good news for you all!!!!! follow this link.
http://www.eserviceinfo.com/downloadsm/22895/SEIKO%20EPSON_EPSON%20RX420-425-430.html
there is a program download file called rx430 dowload and run this program. i only had to choose option waste ink pad and click replace. this fixed my printer and all is fine now. p.s. there are lots of other options to choose on this superb util. enjoy

matthew watson, October 2008

how do i fix my epson rx425? plz

sean, April 2008

i have the same problem, can someone help or direct to website than can thanks funkyfelt

funkyfelt, March 2007

go to http://www.ssclg.com/epsone.shtml you will find the answer .peter

p bainbridge, January 2007