ZDT 6053 Dishwasher
When the door is open the programme lights on top of the door are lit as normal but as i close the door the lights go out and nothing works
Dismantled door and found two wires broken where the door pivots,resoldered wires together and covered with heatshrink,all ok.
Gary, June 2011
loose wiring inside the door going to the control panel/pcb.open the door and on the inside edge of the stainless will be screws holding the fascia and door panel on.remove these until you can remove the fascia and see the pcb.Also check the door microswitch and connections to it
