i have a gravity fed mira shower unit, i have replaced a washer on the mixer unit as it was dripping at the shower head, unfortunately the cams on the mixer unit fell apart before i could take note of the positioning of the cams and now i am not getting the correct mix i.e the flow cannot be regulated properly and is running far to hot, can you give me any hints on the correct positioning of the mixer cams. Many thanks in anticipation.

jim brown, June 2011

You don't tell us which model.

Have you tried this site:

http://www.mirashowers.co.uk/onlinecatalog/pdf/1061361_w2_a.pdf

You should be able to navigate to your model from here:

http://www.mirashowers.co.uk/onlinecatalog/pdf/1061361_w2_a.pdf

Let us know how you get on.

ChicksFan, June 2011