when I turned the machine on the water drips slowly into it, and the pipe makes a jerky movement.
After a minute or two it beeps and goes on to rinse.
Make- Kelvinator
Model - Pride

Kathy, June 2011

Hey I JUST fixed this now on mine.

I fixed it by bypassing(joined the white and yellow wire) the trip out switch which is located under the control module(one screw to remove).Now it Works.

Just unscrew the main bit with all the buttons. Then take the wire plug out of the control, un screw the control panel, and underneath is a white and yellow wire, cut them and mend them together and it will work again.

It's something to do with the out of balance scheme, it gets corroded so just do what i said and it will work, keep what you cut just incase you might need it again.

George, August 2011

What is the fault code showing when it beeps? Copy down exactly which lights are on and which are off along the top row from left to right. Only then can I help.

Lincoln Appliance NZ, June 2011