dishwasher showing service codei30 in aeg sensorlogic

john, July 2011

I had the same thing

You need to switch the machine off and unplug it from the mains.
Tip the machine backwards to empty out any water it may have collected, once no more water comes out, stand it back up and then check your plumbing for blockages.
Once you have cleared any blockages plug in the dishwasher and switch the machine back on and it should work.
Mine was as good as new

I hope this helps

Iain, August 2011

water in the base and the anti flood switch has operated.lay the dishwasher on its back and let the water run out.if it happens again you have a blockage or a leak and need to find out where from

ck, July 2011