3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

my new shed?

can i use 2.5 swa cable to power my shed? im going to spur off my house ring ring with a 13 amp switched spur. i have been told to fit an rcd unit in my shed which will protect the wiring. i want two strip lights and two sockets. also my house has just recently been rewired with a 17th addition db. is this the correct procedure or do i need a second opinion?
sarah123, September 2011
that sounds ok - as long as the distance isnt too far (i wouldnt go more than 20mtrs on 2.5mm) - if its further install 4 mm armoured instead.

Remember that your avalible supply in the shed will be 13amp in total - so if you have any fixed aplliances make sure they will not exceed this

ray d, November 2011
What you are doing is ok but if your house sockets are protected by an RCD you dont need to fit another one

toptrish, September 2011