hi roy check to se if washer is getting a good supply of water ,hoses could be blocked , not sure if yours is a cold fill only ,check filter on intake for blockages they may also be filters in the hoses where there connect to machine .if all looks good and you are confident the machine is getting a good supply of water its time to open her up = remove top of machine,look to where hoses connect to the chamber ,there you will see a electrically controlled valve/solanoid ,check to see if electrical wireing connectors are secure.if valve not opening fully you will need to replace, if valve is not allowing water check for a signal / voltage at connections if no voltage is present re post and we will take it from there.l
killerdanny, October 2011
