I tripped over the cable running from our dish box into the uf output on the back of my crosley 20in hd lcd tv. The uf output was yanked out of the tv, still attached to the cable. How can i repair this uf output.

matt, October 2011

First thing, move the cable, so that you do not trip over it again.
Depends on the internal connection method of the tv, might be wires, or soldered to a pcb.
You will need to remove the back to find out, if it was soldered in, resolder, if wires reconnect, a signal cable is usually just one wire with a braid around, so wire to centre, braid to outer.

SD, October 2011