1 hour ago andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

skipper 36a?

toilet is assembled the float valve is going up but the water is not stopping and it keeps going down the over flow. How does the float valve stop the water rising?
mark edwards, November 2011
not too sure what your one looks like , but if you look at the floating valve, you should see a long plastic screw on the side of it, it has a small arm on it thats on the adjuster for knocking off the water, as it rises up the screw, if you look it you will see it comming back up to knock the water off, your one just needs to be adjusted up the long screw, so it knocks the water off before it hits the overflow, do this by turning the screw, and moveing the bar upwards, loook at it and you will see how it works,

h, November 2011
link Click here to see other fixes for Skipper 36A.