The bottom of the drawer willl not stay in, how do I repair the problem?

Florestine, October 2006

I put No Nails along the slot that the draw bottom fits in, slid the bottom back in the slot and let it harden for 24 hours. It has not fell through since

Margaret, September 2010

You can get some drawer repair supports from ebay

Kevin, February 2010

I am looking for the corner brackets that go inside the dresser drawer. They are the plastic pieces that hold the corners together.

Frustrated, January 2010

I got a couple of very thin "L" brackets from the hardware store and screwed them in place. They give a little bit of support

Tom, February 2009

FIX A DRAWER- SEARCH ON THE NET AND YOU CAN BUY THEM!!!

LOUISE, January 2009

I don't know a good way. Someone just told me to use some nails to support the thin bottom at the slot that it pulls out of and sags below. In my case it's the back part of the bottom that's pulling out of the slot for it in the back wall. That wall actually is bowing out a bit. I'm thinking the best approach is to find a way to pull that back wall in to keep the bottom in the slot. Suggestions would be appreciated.

Jason, July 2007