Hi, Our Krups XP7240 stopped working, no power is coming through, think its the switch, its a bit wobbly. Can't work out how to open it up just to look at it first.
If anyone can help, would be great.
I was able to take out the 3 screws on top but don't want to force it in case anything breaks. Its all pretty thin plastic from what I can see so far.
Kind regards

Yvonne, January 2012

The facade of aluminum can be moved off. Set the machine on the floor and pull "hard" upwards at the facade. This comes off and four screw are uncovered. Remove the two upper screws and then use small stick to relese four clips in holes. After removing that grey panel you have access to that switch.

Jukka, April 2012