What is the meaning of error code F-09 on a washer dryer WD860?

I tried to change the pcb console because of poor lighting up of the led, but the replacement console is showing error code f-09 whereas my original console works fine?

Thanks

Suee11, January 2012

your new board is faulty, simples

m, January 2012

f09..is eprom corrupt.or the two pcbs are not communicating.check the wiring connectors for security.pay attention to the blue wired connectors .Ensure they're nice and tight.Its possible that the bottom pcb has failed, One thing you can try is remove the lid and disconnect the plug on the top pcb then turn it on for 10 seconds then reconnect it and unplug it for 30 seconds. Then try it. If it's the same fault pcb needed or your replacement console pcb needs to be reconfigured.

paul, January 2012