want to fit lights in garage but only have power points fitted.

k blundell, February 2012

if you read his post again,you will see what i mean ,he not know if your wiring up to extra load,then why advise you to plug light in???it not make sence

mm, February 2012

hi mr blundell,all you need to do is take a live supply from your sockets feed,and wire it to a fused spur,then use the feed from fused spur to power your lights,make sure you fit a five amp fuse in the fused spur,its as easy as that,just make sure you turn all power off before you do any work,sd not an electrician,so he not have a clue,

mm, February 2012

As I do not know if your existing wiring is up to the extra load, I cannot tell you, agains regulations, Use a plug in one

SD, February 2012