andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

fault?

hotpoint aqualtis has a F05 fault
sharon, March 2012
F05 is a draining error,

remove the kick panel at the bottom of the machine,it just pulls off.

Behind the panel on the machine is a filter inspection cover,get yourself a shallow dish and put it under the filter,

twist the filter cover anti clockwise and clockwise to tighten when you need to empty the dish.

Once you have drained the water,remove the filter cap and filter,and remove all debris in the housing.

whilst you are down there look into the filter housing and see if you can see anything stuck in the pump,

the pumps impeller should turn freely,

if you need to check that the pump is working then put the machine on SPIN ONLY, and see if you can see it running.

paul, March 2012
normally it means press switch stuck on full,could be because of debri in pump or hoses,try cleaning debri,check pump impellor turning freely and pump operating properly

jj, March 2012
link Click here to see other fixes for Hotpoint Aqualtis.