Can anyway advise how you fit a steering pump into a Mercedes Sprinter Van, T reg (I think 2008) 3 litre diesel manual.

Many thanks,

Lesley

Lesley Bikerkitten Pugh, May 2012

Its fairly straight forward.
loosen the bolts holding the pulley(not remove)
release the belt tensioner by removing the 13mm headed bolt in the black plastic pivot, taking the tension, pull the bolt, and release.
remove the pulley.
remove the 2 visible pipes.
remove the 2 obvious mounting bolts.

install in the reverse order.
remember to put oil in it!

tony, May 2012