we replaced the push button part a few weeks ago and toilet flushed ,though not every time ,now it does not flush and it seems water may be syphoning back to the button as I had to dry it out after removing panel .Is there some simple solution ?

sandradbarker, June 2012

The plastic tube from the push button into the cistern has slipped out of the rubber collar at the back of the green syphon unit .Empty the tube of water if its full.Dry it then add a smear of impact adhesive wait five mins, Push it back into the rubber coller as far as it will go and leave it to set.I used surgical forceps and a mirror on a stick. It is a job to get at.You could remove the syphon and do it

Rog, August 2012