On Saturday I removed all the old sealant and bought a Unibond one. I thought I did a great job until today when I got in the bath and it all cracked. Someone told me to half fill the bath before I did the new seal and I did, so I don't know what has gone wrong. Can anyone please let me know what I've done wrong and how I can fix it?
you used wrong sealant mate,clean all old stuff off the bath,clean all around the area,fill bath up near the top,use silicon sealant,white,leave it full for 48 hours,then drain bath,you will find it will be ok
mm, October 2012
How do you mean, it cracked. if came away from the bath or other surface, could be down to not being clean enough when you did it. other than that all done correct, as long as you used a bath sealant, not other type. All you can do is redo it all same way, I use Meths or ipa, as a final wipe over surfaces, to get any grease type marks off.
