home Fix label Vehicles label_important Vans category LDV

Gearbox select problem ldv maxus 09?

I have a 09 maxus the the gears git realluy hard esp 1st and 2nd only when running, iv put new clutch, pressure plate and realse bearing, to no avail, now changed the gear box and still the same problem in 1st and 2nd and changing gears are still hard,
Please any help would be much thanked,,,,,

Stu, October 2012

home Fix label Vehicles label_important Vans category LDVdone

will not stay in 5 gear when selected.just slips into neutral when you hit the accelerater.

Tony, January 2016

Connector bar from pedal to master cylinder the pins on the bar wear so you dont get full travel on your master cylinder chage the pins for bolts and washers with nyloc nuts job should cure your problem

fred chapman, September 2015

had a lot of slave cylinders away on these giving the symptoms you describe,peel back the dust cover and check for leaks,also if you remove the dash above the gear lever check the metal housing for cracks/stress fractures where the cables are situated.

cdc, October 2012

link Click here to see other fixes for LDV Maxus.