andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

how to fix a problem with hotpoint ultima 1200 wm75 washing machine?

on the display appairs: check out let pipes E15 and it beeps and does not go ahead with the programm. we checked the discherging pipe and it's clear. don't know what to do next.
Josephine Salamone, November 2006
Had the same problem yesterday. Removed the lower rear panel where the waste pipe exits the machine and there is a large black rubber pipe from the bottom of the drum to the waste pump. Remove this pipe and inside you'll find a course plastic filter. Mine was blocked solid with a hair clip and 31p. P.S You will get wet, best to let the water drain from the machine first by removeing the waste pipe and letting the water siffon out

Steve, April 2007
E15 - Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not blocked.
this code also appears if the pump housing is blocked try cleaning it out

phil grimshaw, November 2006
link Click here to see other fixes for Hotpoint WM75.