Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

zanussi WDT1085 replace waste pipe?

CK answered previous query to take off whole rear part of the washer cabinet off but, taking off screws from back, the cabinet is still attached along the sides with some special type of screws. Do you know how to get these off? Is there a special type of screwdriver? I cannot find any instructions on internet or utube.
BINA PATEL, April 2013
I already told you to pop the plastic caps off. use a small electrical screwdriver.Then use an 8mm socket to remove the screws from the bottom of the side panels in the hole where the plastic plug came out of.pull rear half of cabinet off to expose workings/drain pump/hose

CK, April 2013
They may be Torx screws

http://myword.info/definition.php?id=t_drive_1-a

You can get a set of security bits to fit them quite cheaply from Amazon or a DIY/Tool store.

good luck...

Peccavi, April 2013
link Click here to see other fixes for Zanussi.