Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

how can i fix my washing machine?

i have a whirlpool 6th sense front loader washing machine wfs1073dd there is a red light on with clean pump where is the pump located and how do i clean it
SANDRA HENDERSON, May 2013
bottom ;left or right there is a door,behind this is the pump filter,unplug the machine from power point,what you do is unscrew the filter this will let u clear the pump,now beware if the machine is full of water because whae you remove the filter you will have a lot of water over your floor,you could try and drain it by letting down the drain hose into a basin,this will gravity drain the machine,when the basin is full,just lift the hose up empty the basin,

mm, May 2013
Here's a guy on YouTube messing with a Whirlpool Pump.

It's a long video nearly - 18 minutes - and the first part is how to run diagnostics on the machine. The process of diagnostic testing looks very similar to Pre-Flight checks on Boeing's Dreamliner - programming the flight computer.

Very scary.

Good luck...

Peccavi, May 2013
link Click here to see other fixes for Whirlpool 6th Sense.