in the panel IE has appeared

stansfield, July 2013

My machine don't want to let the water out and don't want to spin

Ruwayne, August 2014

Hi Lincon Appliences NZ
Thank you for your imput the problem seems to be the diagram switch / pressure switch It's function not to sure may determin water level.

Stansfield Cape Town, July 2013

Usually means inlet error. Check that water is coming in when you press start. If not then remove hose from back of machine & check that a good flow of water comes out when you turn on the tap. Put hose back on machine & check inlet valve solenoid for continuity & power getting to it. You will need a test meter to check these two.

Linoln Appliance NZ, July 2013