mira sport elec shower - what does a tco unit look like?
I've read previous comments re the overheat light and water running cold which refers to the tco unit. What does it look like? Is there a site that I can refer to that will show me a diagram of the innards of the shower? Any help much appreciated as Mira have quoted £139 to send an engineer to fix the problem which could just be rust and only cost the price if some emery paper to fix! Thanks H
https://www.youtube.com/watch?v=_zi8JbEMYMs, July 2013
I really couldn't say - I am an expert in nothing I'm sorry to say. But it does sound plausible.
The TCO may be operating correctly - in which case the water would get hot and then very hot for a few moments and then the TCO would open and the water then run cold.
If the TCO were permanently tripped (open circuit) then the water would never get hot.
I guess that these TCO things are self-resetting which is to say that after an overheat situation they cool down and allow things to go wrong again - but I just guess.
If it were my shower I would short circuit the TCO as a temporary test - just for a little while - a few seconds but I'm oblivious to danger.
The question is - is your TCO working correctly? Is the TCO at fault or is there another problem?
Do not look to me for a solution - I am without knowledge or experience.
Good luck...
Peccavi, July 2013
Peccavi,
Many thanks. I now know what it is and what it looks like. Do you know if this is liekly to be the cause of the problem? - 'Overheat light on and shower running cold. Thanks. H
H, July 2013
Use Google
select images on the top left
enter...
Shower Thermal Cut Out
look at the images...
