I have been in the trade removing these beading all the time. but I have come up against a beading that appears to want to be removed from the back near to the glass first, Is there a special tool for this or do you have any suggestions.

john w/w, September 2013

This is a follow up to my first question on removing a difficult beading.The rubber on the outside is an arrow rubber not a wedge. What I meant is that the beading its self comes out from the back against the glass, and does not remove from the front edge which is normal. these beadings are more unusual, and I have been told that there is a special tool that you can get, that's all I know, any one out there, can you help.

JOHN W/W, September 2013

go to the outer side and remove the rubber seal around the glass buy pulling it out. this should allow the glass to free up allowing the beading to be removed. when refitting put the beading back then on the outside push the rubber seals in place. hope this is the answer ur looking for

kash, September 2013