Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Jerry asked ... Alpine 7287?    |    Guy asked ... Gaggenau fridge alarm problem?    |    Click here to ask your question

Siemens RCR10/433-GB Receiver Keeps Sticking?

Having read some of these threads, it appears that there is a common problem with the receiver I have with my mobile thermostat. It dos work it you give it a couple of taps on the top when heating is called for, but then the next time it is due to come on, you have to do it again.

Anyone have any solve issues for a sticking relay etc on this type of receiver? I have only had it for 3 years is it on its way out and I need a new one?Thanks
AA01, November 2013
Re the sticking relay on Siemens RCR10/433-GB: I found I had a 24V schrack relay fitted in the receiver, but only 12V is being applied when heat is required. The result was (after a year or more of working fine) that it sometimes worked and sometimes it didn’t quite pull over and needed a tap. I need to source a 12V relay with the same footprint.

Tim H., September 2020
link Click here to see other fixes for Siemens RCR10/433-GB.