I need to remove the front panel from my AEG washer/dryer as the little drain tube in the kick plate has come out too far & I now have water all over the floor. Does the panel unbolt from the top or do I have to lay the machine on its back?

Sara, January 2014

if you lay it on its back you might be able to get from underneath to refit the hose to the filter housing.If not drop filter flap.could be screws in there.if so remove then then carefully pull the bottom plastic plinth off.again restrictive access but might be enough or remove back panel and refit from the back

CK, January 2014