Open the door and if you have a single bolt at the 6 o'clock position in the doorway follow this, if you have 3 bolts let me know. Remove spring ring on front edge of rubber and release the front edge of the rubber, remove the plastic kickplate bottom of machine to reveal 2 screws in bottom of front panel left and right, remove these. Remove the 2 screws securing the door interlock, remove the single bolt in the doorway and the front panel will drop down and away. remove the clamp ring which holds the rubber on to the drum. To replace rubber make sure drain holes in it are at the bottom, then reverse of above. When putting front panel back on thread plastic door release strip through slot into filter cavity. Cheers
Kenjo, March 2014
