How can i check whether it is the impeller or motor for emptying dishwasher that is the problem as it works intermittently .
I can override programme by pushing up float switch at side(always live) and turn impeller at the same time until it starts working constantly , so impeller or motor or both ?
Thanks

Mick, May 2014

It will be the drain pump motor that is required, it will come with the plastic impeller attached. To fit it remove the steel kickplate at the front, remove the clear hose running from left side to middle (also clean out this pipe if blocked) then pump motor will twist off (bayonet fit) after you have lifted the plastic locking tab.

Kenjo, May 2014