i have a fisher & paykel intuitive washing machine that 10 years old and showing error code 105, apparently it could be the rotor sensor but where on machine is this sensor located ?

alan, May 2014

I have a Aqua Smart Fisher Paykel washing machine that says fault 105. How can if fix it?

Dave, January 2023

I got fisher and paykel washing machine and I got code 105 appears on control board and doest do anything if you press other buttons what can be the problem

Shanil prasad, March 2022

105. (01101001) Comms Error Time Out
These faults are reported when the Display Module detects an error in the communications
between the Display Module and the Motor Control Module.
Primary Source: Display Module.
Action: Replace Display Module.
Secondary Source: Motor Control Module.
Action: Replace Motor Control Module.
Tertiary Source: Rotor Position Sensor
Action: Replace Rotor position Sensor. If this corrects the fault refit the
original Display Module and/or Motor Control Module.
This taken from the service manual. States fault usually with display board, secondly the main control board & third the RPS. Would be too expensive to buy boards just to try to pinpoint the fault. Easier to get a service tech out who should have a spare set of boards so he can try them. Then you only have to pay for one part & not 3.

Lincoln Appliance NZ, May 2014