Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

BFI620 dishwasher tripping at end of cycle?

Trips after every cycle pretty much after it has completed the wash and dry. We use the Eco wash cycle which is supposed to be 2 hrs long. M/c trips about 5 -10 min before cycle end.
No warning lights on start up

Any suggestions on how to repair this fault
CB, September 2014
Mr Carson,

There seems to be a flow through heating element on this model.
Is this used for both washing and drying?

How is this used to dry the dishes?

CB, October 2014
I am not qualified or experienced to offer this answer but I guess the heating element to be the culprit.

When it reaches its hottest temperature your damaged element may expand enough to touch the outer casing - a short to earth causes the trip. I imagine the element being at its hottest during the drying cycle.

Others might give a better answer.

Good luck...

Mr Carson, September 2014