My shower had stopped working - no water coming out at all and no solenoid "clunk" on power up. Water supply was OK and the filter was clean. I therefore replaced the flow valve assembly 1563.540 and now the water is flowing apparently normally, however the low flow light illuminates at anything above a low power setting. Have tried without shower head and / or hose attached and this makes no difference, and incoming water seems OK.

Howard, November 2014

Hi Howard, would be interested to know if you had to remove the inlet connecter and/or the switch assembly in order to remove the valve assembly 1563.540. It all looks pretty tight.

Many thanks for any assistance,

Paul

paul, February 2015

Sorted - screw missed from top of assembly unit!

Howard, November 2014