ariston a1635 keeps tripping out the electric board?
hi my ariston a1635 keep on tripping the electric as soon as machine starts few secs later it cuts out got told by a repair man motor had gone took motor off checked the brushes they were very short and worn down I put new set brushes on guy tested the motor said its fine all working on fitted it today and its doing the same thing cuts out as soon as machine starts any help wou;ld be app thanks george
If the motors fine and it’s still tripping out the electrics, then you need to test the heating element to find out the resistance and the continuity . If it is outside the range of 25 to 35 ohms ,you have a faulty element.
Radz, March 2024
George if your motor & heater are both ok, then send your main module (back of machine) to us for test. Cost is £6+vat inc return post. www.emwelec.co.uk
Tony, March 2015
Did you clean away all the carbon dust from motor winding & armature when you replaced the brushes, The carbon dust is very conductive and can short out to earth.
Lincoln Appliance NZ, March 2015
start by checking the plug / the socket, make all the wireing is very tight, check the power lead make sure its ok all the way along it, thts were i would start .
