3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

Fix error E10 on Zanussi ZWD 1271w?

Error E 10 showing. Filter pump clean is there anything else to do ?
Manual suggests water inlet and drain hose should be
checked ,how
James Dougherty, December 2015
How?

You pull the machine out and locate the water inlet. There will be a tiny little tap handle - in line with the flow - on so turn it off

Next undo the water pipe connection at any end - expect a dribble of water from the contents of the pipe.

Now get a jug and turn the tap on - let the water flow into the jug and quickly turn it off.

You have now checked the supply - that only leaves the machine's water inlet valve which is a common problem - they often fail.

The valve is where the water hose connects - easily replaced and not expensive - alternatively you can have a repair technician do the work for you - there are videos on youtube I'm sure.

As for the drain hose - just lay it on the floor - some water is likely to spill out - my money is on the inlet valve but I just guess.

Good Luck..., December 2015
link Click here to see other fixes for Zanussi ZWD 1271w.