What does this mean?3rd wash light flashing
4 and 5 wash light on
2 rinse lights on
1 spin light on
hot and cold lights flashing
high light on
slow light on?

Bobby, September 2016

The other user faults that go with the rippling sound are:- 1 Water temperature light or lights blinking --Not enough water coming in.
2. High water level light blinking - Overloaded. Too many clothes or a heavy blanket.
3. Fast spin light blinking - washing out of balance.

Lincoln Appliance NZ, September 2016

Ok the rippling sound is for user faults that the user can check & usually fix themselves. In your case the blinking hot & cold lights give the clue. It is saying it is not getting any water or not flowing in fast enough. Check both taps are fully open if doing a warm or hot wash. Cold wash only needs cold tap fully open. Also remove hose from inlet valve on machine, point end of hose into sink & open tap. You should have a good strong flow. Next check the filter inside the opening of the valve before putting hose back on. Then try a wash cycle & see if the water flows in quickly. On this model you can open the lid & watch. If it is only dribbling in & sounds like it is straining (hissing sound) then you need a new inlet valve. If it is now flowing in fast then problem solved.

Lincoln Appliance NZ, September 2016

Rippling musical sound.

bobby, September 2016

What sort of error sound are you getting. Is it a single beep at 1 second interval or is it a rippling musical sound like you get when the power is switched on at wall? Once I know this I can help you.

Lincoln Appliance NZ, September 2016

Who can say?

You do not indicate what the machine does that it should not do or what it does not do that it should do...

Does it wash clothes? Does it fill with water?

A washing machine needs water to operate. No water - no wash.

Good Luck..., September 2016