This is similar to other questions on this sight but my washing mashine has developed a fault whereby the washer lets in water then pumps it out straight away and the programmer starts spinning. The error code is 2 flashes (I have not seen this code on this site). What does 2 flashes mean and is it easy to repair?
I have removed and cleaned pump, cleaned through all pipes and checked the brushes... what else can I do?

Chris Webber, January 2007

Ignore the error code. Its got to be the water level switch (WLS). Maybe a safety feature of the A1435, Maybe this stops one flooding the room if the water valve locks open. My answer is to check the switch again. Stuff can get inside during servicing- even air/water locks. Elements just stop working. All I can say is, this is a mechanical issue. Other diagnosis> dis connect the pump's electrical signal, (TURN OFF POWER FIRST!!!!) then try. But you must watch it doesnt over fill. This might clear the WLS. Reconnect the signal and reset machine.

Jason, November 2009

F02 Motor jammed or tachogenerator detached
usually a loose taco on the back of the motor push it back in with your thumb

phil grimshaw, January 2007