What is wrong, if it sounds that the water are pumping out, but the water stays in the dishwasher. On witch stages the water must pump out, so I can ckeck if the pump is working?

marie, March 2021

All dishwashers run the drain pump first at start, to clear any dirty left over water. Start a cycle and listen. The drain pump should be heard running for approximately 30 seconds before stopping and the fill begins. If you can't hear anything then either the pump has a blockage or the pump may be broken and need replacing.

Lincoln Appliance NZ, March 2021

Quite likely the pump is blocked. The manual is a good place to start. If you need to ask again, just make sure you give the make and model of your machine, otherwise we won't have a clue.

Uhh, March 2021