baxi 80 eco will not light. flame failure light does not light but
The system seems to be going through its normal start up process but just does not light.
the pump is working ok
the temp thermostat seems ok
the overheat thermostat is working and reset
i have looked at the pcb board ind can see no signs of burnmarks or bad solder
gas jets look to be clear can any one help thanks
If the fan is running ok it is probably the air pressure switch not activating the micro switch ,which in turn activates the ignition sequence.
vic packman, February 2007
I replaced the electrodes and no joy.Ordered a pcb board and fitted it.All seems ok for 4hrs
Mark, January 2007
I have exactly the same problem.I have assumed it to be the electrodes and have ordered 2 new ones.They should arrive 09/01/2007.If this works I will add another answer,
regards,
Mark
