The washing cycle wont start and the display just says TEST. The washing machine drum goes round but doesn't fill up with water, it was working four hours before though.

Debs, January 2007

debs i presume this is a w hotpoint washer so try these
There have been 3 versions of Demo Mode used on these appliances.

Version 1(Production to- Date code 39 March 2005)

To Activate
1. From the Default screen of a programme, after switching the appliance on press both Start/Cancel and On/Off buttons together until d On appears in display.
2. Press the Start/Cancel button only and tESt appears in the screen (Temp & Spin symbols also appear)

To Deactivate

Press the Start/Cancel button until all the console LED's illuminate.
Press both Start/Cancel and On/Off buttons together until
d OFF appears.
The default screen returns and you can select a new programme.
Note:- The default screen information displayed on these models is that of the programme currently selected by the selector knob.

Version 2 ( during Date Code 39 March 2005- to Date Code 42 June 2005)

To Activate

1. Same method as version 1.

To Deactivate

1. Simply press the Cancel button and the appliance returns to default.

Version 3 (During Date Code 43 June 2005 - to date )

To Activate

1. Press On/Off and Start/Cancel together with the top left option button until d On appears.

To Deactivate

1. Press On/Off and Start/Cancel toghether with top left option button until d OF appears.

phil grimshaw, January 2007