Door will not open at end of cycle. Water drains away ok, water/drain pipe not twisted etc. Have followed suggestions from instruction manual but no luck. Is there any way of manually releasing door or any other suggestions?

John Anderson, January 2007

If the door is forced open when the machine is between cycles and before it is completely finished (at a green dot), then the plastic molding gets busted in the door handle. You have to open up the top and (turn the power off), manually pop the latch. Then you can unscrew the handle and replace it with a new one. I have "DO NOT FORCE" written on my creda door. Otherwise any new cleaning lady will bust it.

Rick Walker, June 2008

john it needs a new door inter lock you can open with the power off from the inside use a small screwdriver to move the hook over to open

phil grimshaw, January 2007